L&T Valves

Leveraging the skills of our qualified team of professionals, we are instrumental in offering the wide range of Single Piece Ball Valve.

L&T Valves manufactures a wide range of soft-seated Process Ball Valves.

The valves are of floating-ball design where the ball moves towards the downstream seat, under pressure, to effect a tight seal.

The valves are available in sizes up to 12 inches and ASME classes up to 600.The valves are available in three-piece, two-piece and single-piece construction, in full-bore and reduced bore in a variety of materials.

Salient Features:

• Mirror-finished solid ball.
• Fine-grained PTFE seats.
• Fire-safe.
• Cavity Pressure Relief mechanism.
• Blowout-proof stem.
• Leak-tight stem sealing.
• Antistatic feature.

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: Mumbai
• Production Capacity: 150/ Day
• Delivery Time: 3 Days

Aquaseal Max is a fabricated steel butterfly valve developed as an alternate for cast iron butterfly and sluice valves in water distribution systems. The highly reliable valve also finds application in power plants, utility and fire water lines, and HVAC systems. Customised Aquaseal Max can be used to handle air, gases and vacuum services. The valve has successfully under gone Proof of Design (POD) test as per AWWA C 504 and AWWA C 516.

The key feature of Aquaseal Max Fabricated Steel Butterfly Valve is a Self-energising Disc Seal that uses line pressure to provide assured sealing.

Salient Features:

• Self-energising Disc Seal - Bi-directional bubble-tight sealing
• Assured Sealing to Atmosphere
• Lighter and Stronger Construction
• Lower Torque, Longer Life
• Maintenance-free Bearings

• Item Code: LTBFV150
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P
• Port of Dispatch: Mumbai
• Production Capacity: 10 /Day

Check Valves are of swing-check design. The valves areavailable with flanged and butt-weld ends.Features:• Integral body seat. In-situ hardfacing provided for Trim 12and 16 valves• Internal hinge design eliminates additional leakage path• Body-bonnet Joint - Class 150 Check Valves offered withsquare-shaped body-bonnet joints in size 2” and with ovalshapedjoints in 3” size. Valves in all other sizes and pressureclasses offered with circular body-bonnet joints.

• Delivery Time: one week

L&T Valves manufactures a wide range of soft-seated Process Ball Valves.

The valves are of floating-ball design where the ball moves towards the downstream seat, under pressure, to effect a tight seal.

The valves are available in sizes up to 12 inches and ASME classes up to 600.The valves are available in three-piece, two-piece and single-piece construction, in full-bore and reduced bore in a variety of materials.

Salient Features:

• Mirror-finished solid ball.
• Fine-grained PTFE seats.
• Fire-safe.
• Cavity Pressure Relief mechanism.
• Blowout-proof stem.
• Leak-tight stem sealing.
• Antistatic feature.

Material Details :

• Body : ASTM A105N
• Adapter : ASTM A105N
• Ball : S.S 316.
• Stem : S.S 410.

• Item Code: LR4446TT
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: Mumbai
• Production Capacity: 20/ Day
• Delivery Time: 1 Day
• Packaging Details: Wooden or cartoon boxes

Material Details :

• Body : ASTM A 216 Gr.WCB.
• Cover :ASTM A 216 Gr.WCB.
• Disc :ASTM A 216 Gr.WCB.

• Item Code: CV150
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P
• Port of Dispatch: Mumbai
• Production Capacity: 15 /Day
• Packaging Details: Wooden & Cartoon Boxing

Material Details :

• Body : ASTM A 105N
• Bonnet :ASTM A 105N
• Stem : S.S 410.

Beyond Standards:

• Gate Valve design complies to API 600, Edition 13
• Offered with API 600 monogram
• Fugitive Emissions - Complies to API 624 and ISO 15848-1 (<50 ppm / Class AH leakage levels, optional)
• Gate Valves tested to API 624 at Yarmouth Research Lab, Maine, USA
• Body gasket leakage <100 ppm observed on eight sizes tested as per API 624 Annexure A
• Fire Safe - By design and tested to API 607/ ISO 10497
• CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU, Annexure III, Module H
• PED Module B1 Design Examination Certificate (certified by DNV) available
• Atex - Meets requirements of Atex Directive 94/9/EC (ATEX), category 2 non-electrical equipment
• SIL 3 Safety Integrity Level for Automated Valves
• Gate valves successfully tested to Shell Design Validation Test Procedure 77/300 and witnessed by Shell Inspectors

Features that Add Value:

• Robust stem-wedge design connection successfully tested as per API RP 591 Annex B
• Hardfaced body guides and wedge slots (sizes >24”)
• Inconel overlay/ cladded options offered

Versatile Solutions:

• Options: Bellows-sealed, FBE/ Fusion-bonded Epoxy Lined, Steam-Jacketed
• ValvTrac™ RFID tags for reliable digital traceability

• Item Code: FGV800
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P
• Port of Dispatch: Mumbai
• Production Capacity: 15/ Day
• Delivery Time: 1 Day
• Packaging Details: Wooden & Cartoon Boxes

The valves are designed foreasy on-line service. To accessthe valve internals, removethree connector bolts andswing the body out using thefourth bolt as a pivot.

Cold Working Pressure (CWP)- 69 bar, with PTFE seat- 103 bar, with RPTFE andspecial filled PTFE

Screwed/ socket-weld valvesin sizes 8 mm to 50 mm havea body rating of Class 800. Inlarger sizes, the body is ratedto Class 300.

Material Details :

• Body : ASTM A 216 Gr. WCB
• Bonnet : ASTM A 216 Gr. WCB
• Wedge : ASTM A 216 Gr. WCB
• Stem : S.S 410.
• Design : ANSI/ASTM

Beyond Standards:

• Gate Valve design complies to API 600, Edition 13
• Offered with API 600 monogram
• Fugitive Emissions - Complies to API 624 and ISO 15848-1 (<50 ppm / Class AH leakage levels, optional)
• Gate Valves tested to API 624 at Yarmouth Research Lab, Maine, USA
• Body gasket leakage <100 ppm observed on eight sizes tested as per API 624 Annexure A
• Fire Safe - By design and tested to API 607/ ISO 10497
• CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU, Annexure III, Module H
• PED Module B1 Design Examination Certificate (certified by DNV) available
• Atex - Meets requirements of Atex Directive 94/9/EC (ATEX), category 2 non-electrical equipment
• SIL 3 Safety Integrity Level for Automated Valves
• Gate valves successfully tested to Shell Design Validation Test Procedure 77/300 and witnessed by Shell Inspectors

Features that Add Value:

• Robust stem-wedge design connection successfully tested as per API RP 591 Annex B
• Hardfaced body guides and wedge slots (sizes >24”)
• Inconel overlay/ cladded options offered

Versatile Solutions:

• Options: Bellows-sealed, FBE/ Fusion-bonded Epoxy Lined, Steam-Jacketed
• ValvTrac™ RFID tags for reliable digital traceability

• Item Code: GV150
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P
• Port of Dispatch: Mumbai
• Production Capacity: 5/Day
• Delivery Time: 1 Days
• Packaging Details: Wooden Boxes, Normally Packing.

Material Details :

• Body : ASTM A 216 Gr.WCB
• Bonnet :ASTM A 216 Gr.WCB
• Stem :S.S 410.
• O & Y Type Bolted Bonnet.

Beyond Standards:

• Pressure-seal Globe Valve design conforms to ASME B 16.34.
• CE Marking – Meets requirements of Pressure Equipment Directive 2014/68/EU, Annexure III, Module H
• Atex - Meets requirements of Atex Directive 94/9/EC (ATEX), category 2 non-electrical equipment
• Safety Integrity Level for Automated Valves - SIL 3 certification available
• Pressure-seal Globe Valves (up to Class 2500) used in Oil & Gas industry tested to ISO 15848-1 Class BH
• Pressure-seal Globe Valves successfully tested to Shell Design Validation Test 77/300 and witnessed by Shell Inspectors

Features that Add Value:

• Valves in intermediate classes reduce total cost of ownership
• Pressure-Seal mechanism utilizes line pressure to enhance seal; ensures sealing integrity at higher operating pressures.
• In-situ hardfaced seat design for all sizes
• Higher hardfacing thickness (3 mm) to ensure consistent hot hardness
• Body-guided Disc offered in Pressure-seal Globe Valves (all sizes/classes) provides disc stability and avoids vibration of the disc-disc nut assembly
• Disc guides hardfaced for longer life
• Customised deposition process in F91/ C12A valves to avoid delamination of hardfaced surfaces
• Live loading of bonnet bolts for F91/ C12A valves
• Special high purity graphite packing (seven rings) provided for pressure rating > Class 2500 in Power applications

Versatile Solutions:

• Available in a cast and forged steels and exotic metallurgies for a wide variety of applications
• By-pass arrangement provided for over-pressure protection based on customer requirement
• ValvTrac™ RFID tagging offered for reliable digital traceability

• Item Code: CSGV150
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: Mumbai
• Production Capacity: 5 / Day
• Packaging Details: Wooden/Normally packing

L&T Valves offers a versatile range of PTFE Sleeved Plug Valves. The valves offer tight shutoff without sealants or lubricants and are available in sizes up to 400 mm, in ASME classes 150 and 300.

The interference fit of the taper plug with PTFE sleeve creates a bubble-tight seal. The sleeve totally surrounds the plug, and sealing occurs around the circumference of the plug. The integrity of the seal is totally independent of line pressure.

The rugged construction, reliable bubble-tight sealing and on-line maintenance feature make the valve an ideal choice for chemicals and highly aggressive process media.

Salient Features:

• Taper Plug Design - Lower operating torque compared to lubricated plug valves
• Plug Adjustment Option - Enables online maintenance
• Avoids downtime
• Large PTFE Sleeve - Bubble-tight shutoff
• No metal-to-metal contact
• Longer service life
• Positively-locked Sleeve - Reliable sealing through thermal cycles
• Wiping action between sleeve and plug - Durability in slurry lines
• Reverse-lip PFA Diaphragm - Self-adjusting dynamic stem seal provides assured sealing to atmosphere
• Rugged Body - Long and reliable service life
• No Cavities - Line Fluid does not get entrapped

Material Details :

• Body : ASTM A 105 N.
• Bonnet :ASTM A 105N. 
• Stem :S.S 410.

Beyond Standards:

• Globe Valve design complies to API 623 (higher stem diameter than BS 1873)
• Fugitive Emissions - Complies to API 624 and ISO 15848-1 (<50 ppm / Class AH leakage levels, optional)
• Globe Valves tested to API 624 at Yarmouth Research Lab, Maine, USA
• Fire safe - By design and tested to API 607/ISO 10497
• CE Marking – Meets requirements of Pressure Equipment Directive 2014/68/EU, Annexure III, Module H
• PED Module B1 Design Examination Certificate (certified by DNV) available
• Atex - Meets requirements of Atex Directive 94/9/EC (ATEX), category 2 non-electrical equipment
• SIL3 Safety Integrity Level for Automated Valves
• Globe valves successfully tested to Shell Design Validation Test Procedure 77/300 and witnessed by Shell Inspectors

Features that Add Value:

• Body Guided disc in globe valves (all sizes/classes) provides disc stability and avoids vibration of the disc-disc nut assembly
• Non-rotating rising stem design in globe valves (2” and above) yields a 20-30% reduction in valve torque vis-à-vis the Rotating rising stem globe valves
• In-situ seat design in all globe valves
• Inconel overlay cladded option available for economical solutions

Versatile Solutions:

• Y-Globe, Bellows-sealed, FBE/ Fusion-bonded Epoxy Lined, Steam-Jacketed
• ValvTrac™ RFID tagging offered for reliable digital traceability

• Item Code: FGLV800
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P
• Port of Dispatch: Mumbai
• Production Capacity: 15/ Day
• Packaging Details: Wooden / Cartoon Boxes Packing

Material Details :

• Body : ASTM A105N.
• Cover : ASTM A105N.

Beyond Standards:

• Check Valve design complies to BS 1868 and API 594
• Offered with API monogram
• Fugitive Emissions - Complies with ISO 15848-1 (<50 ppm)
• Compliance to Annex III Module H of Pressure Equipment Directive 2014/68/EU
• Check valves successfully tested to Shell 77/300 and witnessed by Shell Inspectors

Features that Add Value:

• Internal hinge design, no hole in the body, eliminates leakage path
• Inconel overlay/ cladded option available

Versatile Solutions:

• Swing check valves offered with damper arrangement for non-slam applications
• Options: Tilting Disc Check Valve, Axial Flow Check Valve, Stop Check Valve, Lift Check Valve, Steam Jacketed and FBE/Fusion-bonded Epoxy Lined Valves
• ValvTrac™ RFID tags for reliable digital traceability

Tilting Disc Check Valve

• The disc has a pivot axis closer to the flow-bore centre-line compared with Swing Check Valves.
• Disc seats against a conical surface on the seat ring
• Suitable for pulsating flow and fluid with particulates
• Low susceptibility to water hammer

Axial Flow Check Valve

• Flow forces the disc open against spring force; when the flow is reversed, the spring quickly close the valve by forcing the disc against a seat
• Axial Flow Check Valve offers lower pressure drop, lower reverse flows and low slamming

• Item Code: FCV800
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P
• Port of Dispatch: Mumbai
• Packaging Details: Wooden & Cartoon Boxes

L&T Valves manufactures a wide range of soft-seated Process Ball Valves.
The valves are of floating-ball design where the ball moves towards the downstream seat, under pressure, to effect a tight seal.
The valves are available in sizes up to 12 inches and ASME classes up to 600.The valves are available in three-piece, two-piece and single-piece construction, in full-bore and reduced bore in a variety of materials.
Salient Features:

• Mirror-finished solid ball.
• Fine-grained PTFE seats.
• Fire-safe.
• Cavity Pressure Relief mechanism.
• Blowout-proof stem.
• Leak-tight stem sealing.
• Antistatic feature.

Material Details :

• Body : ASTM A 216 WCB.
• Ball : S.S 316/304